27u small 19 inch server rack on wheels with Toughened Glass Front Door
Features:
1. Comply with ANSI/EIA;RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard;compatible with 19’’ international standard, metric system and EISI standard.
2. The overall use of the frame structure,easy to install.
3. Front door with perforated,back door steel plate.
4. Using the upper and lower line way,can be closed up
and down the alignment channel.large hole size in
bottom can be adjusted.
5. Can easily remove the left and right side doors and
front/rear doors.
6. Install high-speed silent cooling fan at the top of the
cabinet.
7. The bottom of the installation of the steeling wheel
to facilitate the movement, through the foot so that
the overall balance.
8. Front door with elastic lock,solid and cabinet
connection.
Surface finish:
Degreasing, pickling, phosphating, powder coating.
Material and Thickness:
Mounting profile:2.0mm
Others:1.2mm
Color:
RAL9004(black)
RAL7044(gray)
| Brand: | TUXIN | Column spacing: | 465mm (19 inch) |
| No: | TX-PB-6627 | Material: | SPCC cold rolled steel |
| Size: | 600mm*600mm*27U | Function: | Can install server equipment,the router,patch panel,KVM,UPS,Network device,etc. |
| IOS test: | Pass ISO9001:2008 Qualtiy System | Thickness: | Mounting Profile: 2.0mm,others: 1.2-1.5mm |
| Surface treatment: | Degreasing,pickling,phosphating,power coating,etc. | Configuration: | Cage nuts and M6 screws: 20 sets. |
| Standard: | Comply with ANSI/EIA RS-310-D,IEC297-2,DIN41491;PARTI,DIN41494;PART7,GB/T3047.2-92 standard; compatible with ETSI standard. | Device Installation: | It is recommended to install network equipment/server device within 350 mm depth. |
| Order Codes | Capacity | W*D*H(mm) |
| TX-PB*6615 | 15U | 600*600*800 |
| TX-PB*6620 | 20U | 600*600*1000 |
| TX-PB*6624 | 24U | 600*600*1200 |
| TX-PB*6627 | 27U | 600*600*1400 |
| TX-PB*6632 | 32U | 600*600*1600 |
| TX-PB*6637 | 37U | 600*600*1800 |
| TX-PB*6642 | 42U | 600*600*2000 |
| TX-PB*6647 | 47U | 600*600*2200 |
| TX-PB*6824 | 24U | 600*800*1200 |
| TX-PB*6832 | 32U | 600*800*1600 |
| TX-PB*6837 | 37U | 600*800*1800 |
| TX-PB*6842 | 42U | 600*800*2000 |
| TX-PB*6924 | 24U | 600*900*1200 |
| TX-PB*6932 | 32U | 600*900*1600 |
| TX-PB*6937 | 37U | 600*900*1800 |
| TX-PB*6942 | 42U | 600*900*2000 |
| TX-PB*6024 | 24U | 600*1000*1200 |
| TX-PB*6032 | 32U | 600*1000*1600 |
| TX-PB*6037 | 37U | 600*1000*1800 |
| TX-PB*6042 | 42U | 600*1000*2000 |
| TX-PB*8642 | 42U | 800*600*2000 |
| TX-PB*8842 | 42U | 800*800*2000 |
| TX-PB*8042 | 42U | 800*1000*2000 |
basic structure
Common cabinet colors are white, black, and gray. (These are divided into many types, such as orange lines, fine sand lines, etc.); cabinets are divided according to material, there are aluminum cabinets, cold-rolled steel cabinets, hot-rolled steel cabinets; according to the processing technology, there are nine-fold profiles Cabinets, 16-fold cabinets, etc.
Plate type, coating material, and processing technology determine the stability of the cabinet. Its length specifications are generally 600,800mm, width specifications are 600, 800, 1000mm, height specifications are 42U, 36U, 24U. Most of the cabinets used in the early days were made of castings or angle steels that were connected or welded into cabinet frames by screws or rivets, and then added with cover plates (doors) made of sheet steel. The cabinets are bulky, heavy and unsophisticated and have been eliminated. With the use of transistors and integrated circuits, and the miniaturization of various components and components, the structure of cabinets has also grown toward miniaturization and building blocks. The cabinet has evolved from the previous full-panel structure into a plug-in and plug-in structure with a certain size series. The assembly arrangement of the subracks and plug-ins is arranged horizontally and vertically. Cabinet materials generally use thin steel plates, steel profiles of various cross-sectional shapes, aluminum profiles and various engineering plastics. In addition to welding and screw connections, the frame of the cabinet is also bonded.
FAQ
1. Q: Are you a factory or trading company?
A: We are a Factory, Distributor and Trading Company.
2. Q: Where is your factory located? How can I visit there?
A: Our factory and office is located in Ningbo, China.
You can fly to Ningbo or Shanghai airport,Warmly welcome to visit us!
3. Q: Can you do OEM?
A: Sure,we can do OEM products.
4. Q: How can I get some samples?
A: We are honored to offer you samples.
5. Q: How does your factory promise quality control?
A: Quality is priority.We always attach great importance to quality
controlling.Our factory has gained CE,ROHS authentication.
Product Tags:
|
|
Commercial Building Rack Mount Server Cabinet , Communication Server Rack Cabinet Images
|
